Epson SureColor P10000 User Manual Download Page 49

Page: 49 / 231

Using the Optional Auto Take-up Reel

See these sections to use the optional auto take-up reel with your product.

About the Optional Auto Take-up Reel
Installing the Auto Take-up Reel
Attaching the Roll Core to the Auto Take-up Reel
Take Up with the Printable Side Out
Take Up with the Printable Side In
Assembling and Using the Tensioner
Removing Media from the Optional Auto Take-up Reel

About the Optional Auto Take-up Reel

The optional auto take-up reel automatically rolls up printed media as you print.

You can use the auto take-up reel for media with the printable side in or printable side out.

It is best to do the following when using the auto take-up reel:

• Make sure that the end of the roll is cut straight across.

• Use the side of the take-up roll core holder that is the same width as your media core so the core does

not bend or take up media incorrectly.

Parent topic:

Using the Optional Auto Take-up Reel

Installing the Auto Take-up Reel

Before installing the optional auto take-up reel, you need to remove the paper basket from the support
bar and store it under the printer.

Summary of Contents for SureColor P10000








































































































































































































































Search results

Summary of Contents for SureColor P10000

Reviews:

Related manuals for SureColor P10000

Brands by name

Popular brands

Epson SureColor P10000, User Manual

Search results

Summary of Contents for SureColor P10000

Reviews:

Related manuals for SureColor P10000

Brands by name

Popular brands