188
• Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may
prevent the product from printing.
• When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside down;
otherwise ink may leak.
Note:
The lithium batteries in this product contain Perchlorate Material - special handling may apply.
for details.
Parent topic:
Ink Cartridge Safety Instructions
• Keep ink cartridges out of the reach of children and do not drink the ink.
• Be careful when you handle used ink cartridges; there may be ink remaining around the ink supply
port. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them
immediately with water.
• Wear a mask, gloves, and protective eye wear when replacing the waste ink bottle. Should waste ink
get on your skin, immediately wash it off using soap and water. Consult a physician if the skin appears
irritated or is discolored. If waste ink gets in your eyes, rinse immediately with water. Failure to
observe this precaution could result in bloodshot eyes or mild inflammation. If waste ink is swallowed,
consult a physician immediately; do not induce vomiting.
• After replacing the waste ink bottle, wash your hands thoroughly.
• Do not put your hand inside the product or touch any cartridges during printing.
• Install a new ink cartridge immediately after removing an expended one. Leaving cartridges
uninstalled can dry out the print head and may prevent the product from printing.
• Install ink cartridges in all the ink cartridge slots. You cannot print if any of the slots are empty.
• Dried ink on the supply port may cause ink leaks when the cartridge is reinserted and used. Wipe off
any excess ink before reinserting.
• Do not insert or remove replacement cartridges during printing.
• Do not remove the transparent seal from the ink supply port. This may cause the cartridge to become
unusable.
• The green IC chip on this ink cartridge retains a variety of cartridge-related information, such as the ink
cartridge status, so that the cartridge may be removed and reinserted freely. Do not touch the green IC
chip on the side of the cartridge. This may prevent normal operation and printing.
Summary of Contents for SureColor F2100 Series
