2
Installing StylusRIP
Before you install the StylusRIP software, make sure you set up
your printer correctly and install the standard EPSON driver,
following the instructions that came with the printer. Try
printing from WordPad or Notepad to make sure everything
works correctly.
Then follow these steps:
1. Insert the StylusRIP diskette and CD-ROM in the
appropriate drives.
2. Run the
Setup.exe
program located on the diskette.
3. Install the Adobe PostScript printer driver located on the
CD-ROM.
Run the
Setup.exe
program in the
\Drivers\USA
folder
on the CD-ROM. Follow the instructions on the screen to
install the driver. Make sure you choose
FILE
as the printer
port and set the PostScript driver as your default printer
driver. When the program asks if you want to print a test
page, make sure you choose
No
.
4. Make sure your printer is turned on and connected to your
LPT1 port.
5. Run the
Update.exe
program on the diskette.
6. When the update is complete, turn off your printer.
Remove the CD-ROM and diskette from your computer.
7. Attach the PostScript logo sticker to the top of your
printer.
8. Turn your printer back on. It is now licensed and enabled
as a PostScript printer.
quick.fm5 Page 2 Thursday, October 16, 1997 1:43 PM
