Connecting the Printer to Your Macintosh
Follow this procedure only if you are connecting the printer to
the Macintosh using the serial interface. If you are connecting
to a network, see Appendix A of the
Reference Guide.
For the
serial interface, you need to obtain an Apple System/
Peripheral-8 cable (part number M0197) or equivalent.
Note:
The printer also has a parallel port, which is standard for most PCs
but is not used by the Macintosh.
1 .
Make sure both your printer and Macintosh are turned off.
2. Connect one end of the interface cable to the serial connector
on the back of the printer.
1-16
Installing the Printer
