Epson Stylus Pro 9700 Series, User Manual

Page: 133 / 228

133
Printing With Epson Drivers for Macintosh | 133
• Off (No Color Adjustment)
to disable color management in the
printer driver. Choose this mode when you use a color-managed
ICC workflow in Photoshop or another software application. See
page 141 for instructions.
Choosing Paper Configuration Options
Follow these instructions if you are using non-Epson media and you need to
fine-tune its performance.
1. Select
Paper Configuration
from the drop-down menu. You see this
screen:
2. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer’s control panel.
• Color Density
lets you control the ink saturation level.
• Drying Time per Print Head Pass
lets you print with non-Epson
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
• Drying Time per Page
lets you print with non-Epson media and
avoid smearing the ink.
Note: You may need to
change the Color Density
setting if your custom
color profile was created
to optimize D-max and
color gamut.