C-27
Using EPSON Drivers and Utilities for Windows
|
C-27
3. Click the button for the utility you want to run.
4. Follow the instructions on the screen to complete the process. For more
information, see Chapter 3.
Running the Print Head Alignment Utility
If banding appears on your prints, or vertical lines are not straight, you need
to align the print head. You can also use the control panel to align the head
(as described in Chapter 3). Both procedures align the head for all modes
and resolutions.
For the EPSON Stylus Pro 9000, use 13
×
19-inch EPSON coated ink jet
paper (short edge first). You’ll need 4 sheets to complete the procedure,
which includes 12 patterns of 7 rows each and takes about 15 minutes.
For the EPSON Stylus Pro 9500, you can use EPSON roll paper. Six
patterns of 15 lines or boxes are printed, which takes about 10 minutes. The
patterns are repeated across the width of the page.
Follow these steps:
1. Load a sheet of paper in the printer.
2. Click
Start
, point to
Settings
, then select
Printers
. Right-click the
printer
icon and select
Properties
. Or, access the Main Printer
Properties dialog box.
3. Click the
Utility
tab.
4. Click the
Print Head Alignment
button.
5. Follow the messages on your screen. The printer prints the head
alignment patterns. If you’re using cut sheet paper, remove each sheet
after printing and load another sheet.
Summary of Contents for Stylus Pro 9000
Page 1: ...EPSON Stylus Pro 9000 Series PRINTER GUIDE ...
Page 9: ... x x Contents ...
Page 89: ...4 14 4 14 Resolving Problems ...
Page 97: ...5 8 5 8 Specifications ...
