Connecting the Hardware Key
|
7
6. When you see this screen, select your printer model and click
Next
.
7. At the Choose Destination Location screen, click
Next
(or click
Browse
and select the folder where you want to install the software).
8. Click
Next
to start copying the files.
9. At the end of the installation, make sure
Yes, I want to restart my
computer now
is selected, then click
Finish
. Your computer restarts.
10. After the server reboots, you will see the red Fiery window bar across the
top of the screen with a flashing message that the dongle is not plugged in.
Remove the System Software CD-ROM and follow the steps in the next
section to connect the hardware key.
Connecting the Hardware Key
1. After the server software is installed, turn off the server.
2. Connect the hardware key to an available USB port on the server.
3. Turn on the computer. Fiery Spark Professional is launched automatically
and the Fiery bar shows that it is idle:
Select your printer
Click
Next
Summary of Contents for Stylus Pro 7600 Photographic Dye Ink
Page 34: ...30 Quick Installation Guide ...
