Epson Stylus Pro 7450 User Manual Download Page 192

Page: 192 / 373

The Control Panel

192

Printing a status sheet

While in Menu mode, you can print a status sheet to see the
current default values. To print a status sheet, follow the steps
below.

1. Make sure that paper is loaded in the printer.

2. Press the

button to enter Menu mode.

3. Press the

Paper Feed

button or

Paper Feed

button to

display

TEST PRINT

, and then press the

button.

4. Press the

Paper Feed

button or

Paper Feed

button to

display

STATUS SHEET

, and then press the

button.

5. Press the

Enter

button again to start printing a status sheet.

After printing is finished, follow the message on the LCD
panel to return to the

READY

state.

Setting the alert value of the paper

You can get a message when there is not much roll paper left, by
setting the alert value using the steps below.

Note:

This setting is available only when you select

ROLL

for REMAINING

PPR SETUP in Maintenance mode. See “REMAINING PPR SETUP”
on page 197 for details.

1. Press the

button to enter Menu mode.

2. Press the

Paper Feed

button or

Paper Feed

button to

display

PRINTER SETUP

, and then press the

button.

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands