Epson Stylus Pro 7450 User Manual Download Page 152

Page: 152 / 373

The Control Panel

152

Icons

This section describes the meaning of icons displayed on the LCD
panel.

Paper source icon

PLEASE WAIT

Wait until READY appears.

CLEANING
PLEASE WAIT

The printer is cleaning the ink tubes.

PRESS PAUSE BUTTON

Press the Pause button.

CHARGING INK

The printer is charging the ink delivery system.

RESETTING
PLEASE WAIT

The printer is resetting. Wait a while.

UPDATING FIRMWARE

The printer is updating the firmware.

FIRMWARE UPDATE
COMPLETE

The printer has completed update of the
firmware.

POWER OFF
PLEASE WAIT

The printer is turning off.

Icons

Description

Roll Auto Cut On

Roll Auto Cut Off

Sheet

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands