Epson Stylus Pro 7450 User Manual Download Page 147

Page: 147 / 373

The Control Panel

147

Chapter 4

The Control Panel

Buttons, Lights, Messages, and Icons

The control panel of the printer consists of 7 buttons, 4 lights, and
a liquid crystal display (LCD).

Buttons

This section describes the functions of the buttons on the control
panel.

Button

Description

Power button

Turns the printer on or off.

Pause button

Stops printing temporarily.

Restarts printing if pressed when the printer is in
the pause mode.

The printer returns to the READY state when this
button is pressed in Menu mode.

Clears print data in the printer memory if
pressed and held for 3 seconds.

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands