Epson Stylus Photo RX700 Series, Basics Manual

Page: 87 / 98

Important Safety Instructions
87
■
Don’t shake cartridges after you remove them from their packages; this might cause
leakage.
■
Do not remove or tear the label on an ink cartridge; this can cause leakage.
■
Install the ink cartridge immediately after you remove it from its package. Leaving the
cartridge unpacked for a long time before use may result in reduced print quality.
■
Don’t use a cartridge beyond the date printed on the cartridge package. For best
results, use up the ink cartridge within six months of installing it.
■
Don’t dismantle cartridges or refill them; you could damage the print head.
■
Do not touch the green IC chip on the side of the cartridge. This may affect normal
operation and printing.
■
Store ink cartridges in a cool, dark place. Store each ink cartridge so that the bottom
of its package faces down.
■
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at
room temperature for at least three hours before using it.
■
If you remove an ink cartridge for later use, protect the ink supply area from dirt and
store it in the same environment as the Stylus Photo RX700. There is a valve in the
ink supply port, making covers or plugs unnecessary, but care is needed to prevent the
ink from staining items that the cartridge touches. Do not touch the ink cartridge ink
supply port or surrounding area.
LCD Panel Safety Instructions
■ Use only a dry soft cloth to clean the LCD display. Don’t use liquid or chemical
cleaners.
■ If the LCD display is damaged, contact your dealer.
■ If LCD solution gets on your skin, wash it off thoroughly with soap and water. If it
gets in your eyes, flush them immediately with water.