Printing with Windows
5-25
R4C706
long.bk
Rev. C
A5 size
SOFTW.FM
7/19/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Making Settings on the Layout Menu
You can make Reduce/Enlarge, Double-Sided Printing, Multi-
Page, and Watermark settings on the Layout menu. Refer to the
appropriate section below.
Roll Paper
Option
The Roll Paper Option settings are only available
when Roll Paper is selected as the Paper Source
setting. These features are not available when Sheet
Feeder is selected.
The available settings are described below.
Banner Mode:
Select this mode when you want to print multi-page
data as continuous data on the roll paper, rather
than as individual pages. When this check box is
selected, the Save roll paper check box is enabled.
Cut Sheet Mode:
Select this mode when you want to print multi-page
data as individual pages, rather than as continuous
data. When this check box is selected, the Print page
frame check box is enabled.
Save roll paper:
Select this check box when you want to save roll
paper. When this check box is selected, the blank
portion of the last page of your document is not fed
through the printer. This feature is only available
when Banner Mode is selected.
Print page frame:
Select this check box to print a line on the roll paper
between pages in a multi-page document to
indicate where the paper should be cut. This feature
is useful when it is unclear where the page breaks
should be. This feature is only available when Cut
Sheet Mode is selected.
