Epson Stylus Photo 875 DC Manual Download Page 177

Page: 177 / 212

Troubleshooting

9-19

Note:

If you cannot remove the foreign object by yourself, do not use force
and do not disassemble the printer. Call your dealer for assistance.

3. If the error is not cleared, contact your dealer.

Paper Doesn't Feed Correctly

If one of the following problems has occurred, try the solution(s)
listed for the problem.

❏

Paper doesn't feed

❏

Multiple pages feed

❏

The paper jams

❏

Paper isn't ejected fully or is wrinkled

Paper doesn't feed

Remove the stack of paper and make sure of the following:

❏

The paper isn’t curled or creased.

❏

The paper isn’t too old. See the instructions that came with
the paper for more information.

❏

The paper isn’t loaded above the arrow on the left edge guide.

❏

The paper isn’t jammed inside. If it is, remove the jammed
paper.

❏

Back and/or color ink are out. Replace the appropriate
cartridge. See “Replacing an Ink Cartridge” on page 7-2

Summary of Contents for Stylus Photo 875 DC





















































































































































































































Search results

Summary of Contents for Stylus Photo 875 DC

Reviews:

Related manuals for Stylus Photo 875 DC

Brands by name

Popular brands

Epson Stylus Photo 875 DC, Manual

Search results

Summary of Contents for Stylus Photo 875 DC

Reviews:

Related manuals for Stylus Photo 875 DC

Brands by name

Popular brands