14
Copying a Photo or Document
3. Slide the strip of film into the holder in the orientation show below with the
shiny side up. (The images should not appear reversed.) Make sure the film
slides under the tabs.
4. Close the film strip cover. Gently press until it clicks into place.
5. Place the holder’s tabs into the two small holes at the left edge of the glass.
Make sure the film strip is towards the back of the glass to align it with the
fluorescent lamp when you close the document cover.
Continue with the steps on page 15 to scan and print your photos.
Fluorescent lamp
CX7700.book Page 14 Wednesday, July 27, 2005 5:57 PM