89
4. If the outer case or inside of the sheet feeder is dirty, clean it with a soft cloth
dampened with mild detergent. Keep the scanner section closed to prevent water
from getting inside.
5. If ink accidentally gets inside the printer, wipe it off with a damp cloth.
Warning:
Don’t touch the gears or any other parts inside the Stylus CX.
Caution:
Never use a hard or abrasive brush, or benzine, alcohol, or paint thinner
for cleaning; they can damage the Stylus CX components and case.
Don’t get water on the Stylus CX components and don’t spray lubricants or oils
inside the Stylus CX.
Transporting the Stylus CX
If you need to ship your Stylus CX all-in-one, you must prepare it for transportation
by packing it in its original box or one of a similar size.
Caution:
To avoid damage, remove the ink cartridges as described below when
transporting the Stylus CX.
1. Turn off the Stylus CX.
2. Remove any paper from the sheet feeder and close the paper support.
3. Unplug the power cord from the electrical outlet. Then disconnect the USB cable
from the Stylus CX.
4. Open the scanner section and make sure the ink cartridge holder is in the home
position on the right.
Clean here
Summary of Contents for Stylus CX4100 Series
Page 45: ...47 Home Mode ...
