If necessary, change the loading position of the paper using the
Default setting mode as described in Chapter 2.
Problems with Printing
If you cannot get the printer to print, first check that paper is
loaded in the printer. Then check that the printer is plugged
into a working electrical outlet that is not controlled by a
switch or timer. Verify that the interface cable is securely
connected to the printer and computer.
After you have done all this, see the following specific
problems.
Printing stops and the Error and Pause lights are on.
No paper is loaded in the printer. Load paper in the sheet
feeder; then press the
Pause
button to turn the
Pause
light off
and resume printing.
Printing stops and the Economy light is flashing, but the Error
light is off.
Paper may have jammed in the printer. Turn off the printer
and gently pull out the paper. If it tears and remains inside the
printer, open the printer cover and remove the paper. See
“Paper Handling Problems” later in this chapter for
information on preventing paper jams.
The Error light is flashing.
The ink cartridge is low on ink; replace the ink cartridge as
described in Chapter 3.
R
Hudson User’s Guide
A5 size
Chapter 4
10-28-95
DR, pass 2-Rev1
Troubleshooting
4-7
