Epson Stylus COLOR 900G User Manual Download Page 15

Page: 15 / 206

Introduction

Page 14

ENERGY STAR Compliance

As an E

NERGY

TAR

Partner, EPSON has determined that this product

meets the E

NERGY

TAR

guidelines for energy efficiency.

The EPA E

NERGY

TAR

Office Equipment program is a voluntary

partnership with the computer and office equipment industry to promote
the introduction of energy-efficient personal computers, monitors,
printers, fax machines, and copiers in an effort to reduce air pollution
caused by power generation.

Year 2000 Ready

Your EPSON printer is Year 2000 Ready. However, be sure the other
parts of your computer system are also ready for the year 2000.

Important Safety Instructions

Before using your printer, read the following safety instructions to make
sure you use the printer safely and effectively:

◗

Turn off and unplug the printer before cleaning. Clean with a damp
cloth only. Do not spill liquid on the printer.

◗

Do not place the printer on an unstable surface or near a radiator,
heating vent, or direct sunlight.

◗

Do not block or cover the openings in the printer’s case or insert
objects through the slots.

Always turn the
printer off using the

power button.

Don’t switch off the
power strip, or unplug
the printer until the

power light is off.

color900.book Page 14 Wednesday, January 6, 1999 12:39 PM

Summary of Contents for Stylus COLOR 900G















































































































































































































Search results

Summary of Contents for Stylus COLOR 900G

Reviews:

Related manuals for Stylus COLOR 900G

Brands by name

Popular brands

Epson Stylus COLOR 900G, User Manual

Search results

Summary of Contents for Stylus COLOR 900G

Reviews:

Related manuals for Stylus COLOR 900G

Brands by name

Popular brands