4
The power cord or plug is damaged; liquid has entered the
printer; the printer has been dropped or the case damaged;
the printer does not operate normally or exhibits a distinct
change in performance.
❏
If you plan to use the printer in Germany, the building
installation must be protected by a 10 or 16 amp circuit
breaker to provide adequate short-circuit protection and
over-current protection for this printer.
A Few Precautions
Take note of the following when using the printer, handling the
ink cartridges, or choosing a location for the printer.
When using the printer
Observe the following:
❏
Do not put your hand inside the printer or touch the ink
cartridges during printing.
❏
Do not move the print head by hand; otherwise, you may
damage the printer.
❏
Always turn the printer off using the
P
power button. When
this button is pressed, the
P
power light flashes briefly and
then goes out. Do not unplug the printer or turn off the power
to the outlet until the
P
power light stops flashing.
❏
Before transporting the printer, make sure that the print head
is in the home (far right) position and the ink cartridges are
in place.
Summary of Contents for Stylus COLOR 685
Page 24: ...24 ...
