Installing Software and Configuring the Print Server
27
10. When you see this screen, click
Finish
.
11. If you’re running Windows Me, 98, or 95, double-click
Install EpsonNet Direct
Print Utility
on the EPSON Installation Program screen and follow the
instructions on the screen to install the utility and restart your computer.
Now that you’ve installed WP-Admin, you can change the print
server’s configuration at any time. To start WP-Admin from the
Windows Start menu, click Programs or All Programs > Epson
Printers > EpsonNet Wireless > WP-Admin.
Now you’re ready to set up a network port so that your computer can use the printer
over the wireless network. Go to one of the following sections:
■
If you’re running Windows XP, go to “Setting Up a Network Port on Windows
XP” on page 29.
■
If you’re running Windows 2000, go to “Setting Up a Network Port on Windows
2000” on page 30.
■
If you’re running Windows Me, 98, or 95, go to “Setting Up a Network Port on
Windows Me, 98, or 95” on page 32.
■
If you’re running Windows NT, go to “Setting Up a Network Port on Windows
NT” on page 33.
