Epson Stylus 800 Series User Manual Download Page 55

Page: 55 / 102

Cleaning the Printer

To keep your printer operating at its best, you should clean it

thoroughly several times a year.

Make sure the printer is

off.

Remove any paper from the paper feeder.

Use a soft brush to carefully brush away all dust and dirt.

If the outer case or the inside of the paper feeder is dirty,

clean

it with a soft, clean cloth dampened with mild

detergent. Keep the printer cover closed to prevent water

from getting inside the printer.

If the inside of the printer accidentally gets soiled with ink,

wipe it off with a damp cloth.

Transporting the Printer

If you need to transport your printer some distance, carefully

repack it using the original box and packing materials as

follows:

Open the printer cover and make sure

that

the print head is

capped in the far right position. If the print head is not

capped,

the

printer to cap it. Then,

off the

printer.

3-4

Maintenance and Troubleshooting

Summary of Contents for Stylus 800 Series







































































































Search results

Summary of Contents for Stylus 800 Series

Reviews:

Related manuals for Stylus 800 Series

Brands by name

Popular brands

Epson Stylus 800 Series, User Manual

Search results

Summary of Contents for Stylus 800 Series

Reviews:

Related manuals for Stylus 800 Series

Brands by name

Popular brands