Epson SC-V7000 User Manual Download Page 75

Page: 75 / 130

Maintenance

Other Maintenance

Items to Prepare

Before you start cleaning, prepare the following items.

When the items supplied are finished, purchase commercially available consumables.

Make sure you prepare ink bottles and replacement parts dedicated for this printer.

"Consumables and Optional Items" on page 117

•

Protective equipment (commercially available)

Wear protective glasses, protective gloves, a protective mask, and protective clothing.

•

Cleaning liquid (consumable)

Use this to clean the area such as the UV lamp and the plates around the print head.

•

Polyester/nylon knit woven fabric (without fluff, commercially available)

Use this to clean the area such as the UV lamp and the plates around the print head.

Example: SuperPolx from the Berkshire company

•

Coolant (consumable)

Be sure to use the specified coolant. Using a different coolant may damage the UV lamp cooling unit.

"Consumables and Optional Items" on page 117

•

Ink bottles (consumable)

Use these to refill the main ink tank when ink is running low.

•

Scraper (commercially available)

Use this when cleaning the media table.

Timings

Cleaning Locations

As soon as the ink level warning is

displayed

Refilling ink

"Refilling Ink" on page 86

When clogged nozzles are confirmed as a

result of the clogged nozzles check

Head cleaning and so on

"Clearing Clogged Nozzles" on page 92

Summary of Contents for SC-V7000



































































































































Search results

Summary of Contents for SC-V7000

Reviews:

Brands by name

Popular brands

Epson SC-V7000, User Manual

Search results

Summary of Contents for SC-V7000

Reviews:

Brands by name

Popular brands