manualshive.com logo in svg

Epson SC-V7000, User Manual

Share
Download
Epson SC-V7000 User Manual Download Page 117

117

Appendix

Appendix

Consumables and Optional Items

The following is a list of the consumables and optional items that can be used with this printer. (As of August, 2020)

For the latest information, see the Epson Website (http://www.epson.com).

Ink Bottles

Epson recommends the use of genuine Epson ink bottles. Epson cannot guarantee the quality or reliability of non-

genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and under 

certain circumstances may cause erratic printer behavior.

Information about non-genuine ink levels may not be displayed, and use of non-genuine ink is recorded for possible 

use in service support.

Others

Name

Part Number

Notes

Black

T49V1

Cyan

T49V2

Magenta

T49V3

Yellow

T49V4

Light Cyan

T49V5

Light Magenta

T49V6

Gray

T49V7

Red

T49V8

White

T49V9

Varnish

T49VA

Cleaning

T49V0

Use this to clean the area such as the plates around the print head.

(In this guide, this item is described as "cleaning liquid".)

Name

Part Number

Notes

Coolant

C13S210135

Refills the UV lamp cooler.

Waste ink bottle

C13T724000

Collects waste ink from the ink receiver.

Summary of Contents for SC-V7000



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands