manualshive.com logo in svg

Epson SC-S40600 Series, User Manual

Share
Download
Epson SC-S40600 Series User Manual Download Page 67

Cleaning Around the Print Head

If you notice any ink clots, lint, or dust when checking
the area around the print head, clean the area by
following the steps below.

The SC-S80600 Series/SC-S80600L Series/SC-S60600
Series/SC-S60600L Series have 2 print heads. Clean
around both print heads.

Before starting this procedure, be sure to read the
following:

U

 

“Precautions regarding maintenance” on page 63

A

After the print head moves to the left end of the
printer, open the left maintenance cover.

B

Dampen the cleaning stick with ink cleaner.

Use new cleaning stick and ink cleaner.

U

 

“Using ink cleaner” on page 65

c

Important:

❏

Rinse a cleaning stick using ink cleaner for
each step.

❏

After removing a clot of ink with a
cleaning stick, wipe off using a clean-room
wiper.

C

Wipe off any adhered ink, lint, and dust from the
parts that are indicated by the arrows below.

D

Wipe off any adhered ink, lint, and dust from the
parts that are indicated by 

 below.

Right print head only in SC-S40600 Series.

E

Wipe off any adhered ink, lint, and dust from the
parts that are indicated by 

 below.

F

Close the left maintenance cover.

Cleaning Around the Caps

Before starting this procedure, be sure to read the
following:

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series     User's Guide

Maintenance

 

67

Summary of Contents for SC-S40600 Series






























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands