Epson SC-S40600 Series User Manual Download Page 63

Page: 63 / 157

What You’ll Need

Ready the following items before beginning cleaning
and replacement.

When the supplied parts have been completely used,
purchase new consumables.

Prepare dedicated parts for this printer when replacing
ink cartridges/ink supply units or performing
maintenance.

“Options and Consumable Products” on

page 123

If your gloves have worn out, prepare commercially
available nitrile gloves.

Protective eyeglasses (available in the market)

Protects your eyes from ink and ink cleaner.

Mask (available in the market)

Protects your nose and mouth from ink and ink cleaner.

Maintenance Kit (supplied with the printer)

For general cleaning.

The following items are in the kit.

Gloves (x12)

Cleaning sticks (x20)

Clean-room wipers (x100)

Tweezers (x1)

ink cleaner (supplied with the printer)

Use when wiping ink stains.

Usage method

“Using ink cleaner” on page 65

A metal tray (supplied with the printer)

Use when putting cleaning utensils, removed
consumables, or ink cleaner moved in the container
supplied with the printer.

Important:

If the used cleaning stick, etc. are directly put on the
printer, it may cause a deformation from the
characteristics of the ink cleaner.

Soft cloth (commercially available)

Use when cleaning inside the printer. We recommend
an item that is not likely to generate lint or static
electricity.

Grease kit (supplied with the printer)

Use when applying grease to the carriage rod.

The following items are in the kit.

Gloves (x16)

Grease tool (x1)

Cleaning sticks (x8)

Pad A (x16)

Pad B (x16)

Grease (x2)

Precautions regarding
maintenance

Note the following points when cleaning and replacing
parts.

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide

Maintenance

Summary of Contents for SC-S40600 Series






























































































































































Search results

Summary of Contents for SC-S40600 Series

Reviews:

Related manuals for SC-S40600 Series

Brands by name

Popular brands

Epson SC-S40600 Series, User Manual

Search results

Summary of Contents for SC-S40600 Series

Reviews:

Related manuals for SC-S40600 Series

Brands by name

Popular brands