Epson SC-R5000 Series User Manual Download Page 76

Page: 76 / 148

What You’ll Need

Ready the following items before beginning cleaning
and replacement.

When the supplied parts have been completely used,
purchase new consumables.

Prepare genuine ink supply units or maintenance
parts when performing replacements.

“Options and Consumable Products” on

page 128

If your gloves have worn out, prepare commercially
available nitrile gloves.

Protective eyeglasses (available in the market)

Protects your eyes against ink and cleaning liquid.

Mask (available in the market)

Protects your nose and mouth from ink and cleaning
liquid.

Cleaning kit (supplied with the printer)

For general cleaning.

The following items are in the kit.

Cleaning fluid (x1)

Cup (x1)

Gloves (x16)

Cleaning stick (x50)

“Using Cleaning liquid” on page 78

Metal or plastic (PP or PE) tray (available in the
market)

Use when putting cleaning utensils, removed
consumables, or cleaning fluid moved to the container
supplied with the printer.

Media cleaner brush (supplied with the printer)

Use this when cleaning the media cleaner.

Soft cloth (commercially available)

Use when cleaning inside the printer. We recommend
an item that is not likely to generate lint or static
electricity.

SC-R5000 Series/SC-R5000L Series User's Guide

Maintenance

Summary of Contents for SC-R5000 Series





















































































































































Search results

Summary of Contents for SC-R5000 Series

Reviews:

Related manuals for SC-R5000 Series

Brands by name

Popular brands

Epson SC-R5000 Series, User Manual

Search results

Summary of Contents for SC-R5000 Series

Reviews:

Related manuals for SC-R5000 Series

Brands by name

Popular brands