Depending on the status of the media loading lever, operations differ as shown below.
❏
When the media loading lever is moved to the front
You can feed the media by holding down the button. Press and hold the button to speed up the feeding. This is useful
when fine-tuning media alignment as you can feed the media in increments of 0.4 mm by pressing the button briefly.
❏
When the media loading lever is moved to the back
You can rewind media that has been loaded with the printable side in by holding down the button.
E
(Home)
Press to return to the home screen during menu operations and so on (when
is lit).
(Home) is not lit when it cannot be used
F
Screen
Displays the printer's status, menus, error messages, and so on.
U
“Understanding and Operating the Display” on page 17
Understanding and Operating the Display
Understanding the Display
This section explains how to view the following two screens.
Home screen
You can check the current status of the printer.
Startup adjustment screen
You can quickly change the major adjustment values. This is useful when you need to make frequent adjustments
to stabilize the print quality, such as when you start using new media.
You can switch between the home screen and the startup adjustment screen each time you press
.
SC-R5000 Series/SC-R5000L Series User's Guide
Introduction
17
