manualshive.com logo in svg

Epson SC-P6000 Series, User Manual

The Epson SC-P6000 Series comes with a comprehensive Setup Manual that ensures easy installation and optimal performance. This user-friendly manual can be downloaded for free from our website, allowing you to get started quickly and efficiently. Explore all the features and benefits of this exceptional product with our helpful manual.

Share
Download
background image

F

Pull out the ink cartridge.

c

Important:

Removed ink cartridges may have ink around
the ink supply port, so be careful not to get any
ink on the surrounding area when removing
the cartridges.

G

Remove the new ink cartridge from the bag.
Shake the ink cartridge for 5 seconds 15 times
horizontally in approximately 5 cm movements
as shown in the illustration.

c

Important:

Do not touch the IC chips on the ink cartridges.
You may not be able to print properly.

H

With the 

u

 mark on the ink cartridge facing up,

press it in until you hear it click.

Match the color of the ink cartridge to the color of
the label on the back of the ink cover.

c

Important:

Install all ink cartridges into each slot. You
cannot print if any of the slots are empty.

I

Close the ink cover.

Replacing Maintenance Boxes

If the message 

No Enough Space

 is displayed, replace

the specified Maintenance Box.

Supported Maintenance Boxes

U

 

“Options and Consumable Products” on

page 156

SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series     User's Guide

Maintenance

 

134

Summary of Contents for SC-P6000 Series







































































































































































































Reviews:

No comments

Related manuals for SC-P6000 Series

Roland VT-200 User Manual preview
VT-200
Brand: Roland Pages: 2
Roland VP Series Manual preview
VP Series
Brand: Roland Pages: 3

Brands by name

Popular brands

Load more brands