Epson SC-F2100 SERIES User Manual Download Page 63

Page: 63 / 143

Preparation

Ready the following items before beginning cleaning
and replacement.

When the supplied parts have been completely used,
purchase new consumables.

Prepare genuine parts when replacing ink cartridges or
performing maintenance.

“Options and Consumable Products” on

page 114

Protective eye-wear (commercially available)

Protects your eyes against ink and ink cleaner.

Tweezers

Use this to remove lump or film of waste liquid.

Maintenance kit (supplied with the printer)

Use this to clean around the caps and print head.

The set contains gloves, cleaning sticks, ink cleaner, and
a cup.

Gloves (x4)

Cleaning stick (wide) (x25)

Cleaning stick (narrow) (x25)

Ink cleaner (x1)

Cup (x1)

Metal or plastic tray (commercially available)

Use this to hold used cleaning sticks, removed parts, or
to prevent ink from soiling the printer when cleaning
around the print head.

Air filter (consumable)

When cleaning the scale, use the cleaning cloth supplied
with the air filter.

Soft cloth

This is used to clean the edges of the metal and to clean
platens without grip pad.

SC-F2100 Series User's Guide

Maintenance

Summary of Contents for SC-F2100 SERIES
















































































































































Search results

Summary of Contents for SC-F2100 SERIES

Reviews:

Related manuals for SC-F2100 SERIES

Brands by name

Popular brands

Epson SC-F2100 SERIES, User Manual

Search results

Summary of Contents for SC-F2100 SERIES

Reviews:

Related manuals for SC-F2100 SERIES

Brands by name

Popular brands