Overview
This section explains the basic workflow from preparing a T-shirt before printing to post-treatment after printing.
The following shows the procedure for sending a job from the Garment Creator supplied to the printer and then
printing on a T-shirt. The printer also allows you to print by connecting a USB memory containing a saved job.
U
“Printing from a USB Memory” on page 58
Before Printing
Perform these steps before you start printing operations to maintain print quality.
U
Pre-treatment (only for White ink)
When printing with White ink, you need to apply pre-treatment liquid to the T-shirt.
Applying pre-treatment liquid allows the White ink to develop creating a more vivid color.
U
“Pre-treatment (only for White ink)” on page 31
Creating and Sending Jobs
Create jobs by laying out images in the supplied Garment Creator, and then send them to
the printer.
U
“Creating and Sending Jobs” on page 36
Preparing the Platen
Attach the platen for printing to the printer.
U
“Preparing the Platen” on page 37
Loading the T-shirt (media)
Load the T-shirt on the printer.
U
“Load the T-shirt (media)” on page 45
Printing
Check that the
x
light is on before you start printing.
U
“Starting and Canceling Printing” on page 56
SC-F2100 Series User's Guide
Basic Printing
29
