Epson SC-B7000 Series, Service Manual

Page: 112 / 144

SC-F7000 Serie/SC-B7000 Series Revision A
ADJUSTMENT Head Related Checks and Adjustments 112
Confidential
4.11.6 Head Slant Manual Adjustment (PF direction)
PAPER USED
† Size: 24 inch length or longer
† Type: Premium Glossy Photo Paper (250)
EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON.
2. Load the paper into the printer.
3. Start the Service Program and select Head Slant Manual Adjustment (PF
direction) .
4. Click [Run] . The adjustment pattern is printed.
Figure 4-9. Head Slant Manual Adjustment (PF direction) Screen
5. Examine the printed pattern using a loupe.
See if the gaps between the blocks are parallel.
If adjustment is needed, go to
Step 6 .
Figure 4-10. Judgment
6. Press the F11 key of the keyboard to unlock the CR unit.
OK
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
A = B
C = D
OK
A = B
C = D
用紙搬送方向
NG
A ≠ B
C ≠ D
NG
A ≠ B
C ≠ D
It does not matter if the gap widths
(the width of A-B and that of C-D)
differ.
Paper feed direction