EN
Assembly
TC
組裝
After completing the assembly, use the included roll core and adjustment paper to perform parallel adjustment of the Auto Take-up Reel Unit.
If parallel adjustment is not performed, the media may not be fed straight, resulting in printing or take-up failures.
In this operation, checks and adjustments are performed on the printer’s front and rear sides at the same time, so use two persons.
完成組裝後，請使用內附的紙軸和調整用紙進行自動收紙單元的平行調整。
如果未進行平行調整，材料可能不會平整進入，從而導致列印或收紙錯誤。
進行此操作時，確認和調整需同時在印表機的正面和背面進行，因此需要兩人操作。
Parallel Adjustment
平行調整
[ [ [
[ 2 [
[ 3 [
c
Press in the roll holder until part A in the figure on the left is hidden.
壓入滾筒支撐架直到左圖中的
A
部位隱藏起來。
[[
