background image

 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

 
 
 

 
 
 

 
 
 

 
 
 

 

NOTICE 

No part of this material may be reproduced or duplicated in any form or by any means without the written 
permission of Seiko Epson.    Seiko Epson reserves the right to make changes to this material without notice.   
Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material 
or due to its application or use in any product or circuit and, further, there is no representation that this material 
is applicable to products requiring high level reliability, such as, medical products.    Moreover, no license to 
any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty 
that anything made in accordance with this material will be free from any patent or copyright infringement of a 
third party.  This material or portions thereof may contain technology or the subject relating to strategic 
products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export 
license from the Ministry of Economy, Trade and Industry or other approval from another government agency. 

 

All other product names mentioned herein are trademarks and/or registered trademarks of their respective 
companies. 

 

©SEIKO EPSON CORPORATION 2008, All rights reserved.

 

Summary of Contents for S5U1C62N51E1

















Reviews: