Epson S5U1C17M03T, Quick Start Manual

Page: 9 / 13

9
Switch measurement mode
You can switch to any measurement mode by setting the rotary switch. Check the
correspondence between the set value, measurement mode and jumper setting from
the table below.
Except for default range, please refer to the “S5U1C17M03T Manual”.
# SW1
Measurement
mode
Default range
Mode
name
JP2 JP3 JP4 JP5 JP6 JP8 JP9
0
DC voltage
6V DCV
open short short open open open open
1
AC voltage
6V ACV
open short short open open open open
2
DC current
6mA DCI
open short short 2-3short short short open
3 AC current 6mA ACI open short short 2-3short short short open
4
Resistance
(CC-method)
600Ω OHM CC
short short short open open open open
5
Resistance
(CV-method)
600Ω OHM CV
short short short open open open open
6
Continuity check
CV CONT
short short short open open open open
7
Capacitance
(CC-method)
1uF CAP CC short short short open open open open
8
Capacitance
(CV-method)
10nF CAP CV
short short short open open open open
9
Diode VF
- DIODE
short short short open open open open
A
AC voltage and
frequency
6V FREQ ACV
open short short open open open open
B
AC current and
frequency
6mA FREQ ACI open short short 2-3short short short open
C
Internal
temperature
- TEMP open short short open open open open
COM MEAS
T13 T12
uA/mA A
T16 T15
・
Connection of the positive probe
Current measurement(A range) : T15
Current measurement(uA/mA range) : T16
Others : T12
・ Rotary switch