1. Overview
S5U1C17965T2 Manual
Seiko Epson Corporation
1
(Rev.1.0)
1. Overview
The S5U1C17965T2 (Software Evaluation Tool for S1C17555/565/955/965) is an evaluation and development
support board for the Seiko Epson single-chip microcontroller S1C17555/565/955/965.
The S5U1C17965T2 has the S1C17965 chip and circuits for external connections, and provides through-holes for
extension connectors that draw out the S1C17965 I/O pins. By connecting this tool with a user board via these
through-holes, the functions of the tool can expanded.
The S5U1C17965T2 can be used as the S1C17555/565/955/965 software development environment, by
connecting to the Seiko Epson emulator S5U1C17001H (ICDmini).
- Operating temperature range
5°C to 35°C
- Operating voltage range
(Please refer to the technical manual for S1C17555/565/955/965.)
1.1
Usage Method
The S1C17555/565/955/965 software development environment can be set up with the following procedures.
(1) Insert the S1C17965 chip into the IC socket (U1)
*1
.
(2) Connect
*2
the S5U1C17001H (ICDmini) to the ICDmini interface connectors (J5, J6) using the dedicated
cables included in the ICDmini.
(3) Provide power supplies
*3
through the power supply connectors (J8, J9, J10).
(4) Connect the ICDmini to a PC
*4
using the USB cable included in the ICDmini.
*1 Insert the S1C17965 chip in the direction where the No.1 pin of the chip is matched to the position of
▼
(triangle) mark printed on the board. If the chip is inserted in a wrong direction and the power supply is
turned on,
the chip might be damaged.
*2 For more information on connecting this product, refer to the S5U1C17001H User Manual (ICDmini
Ver2.0). Use the S5U1C17001H2 (ICDmini Ver2.0) or later versions for this product. When using with the
S5U1C17002H (ICD Board), make the Vpp regulator / boost circuit enabled with jumper settings. Refer to
Chapter 3 in details.
*3 DO NOT apply a voltage exceeding the S1C17965 power supply voltage input range. For the S1C17965
power supply voltage input range, refer to the S1C17555/565/955/965 Technical Manual. When using the
LVDD and AVDD regulators, the power supplies through J8 and J10 are unnecessary. Refer to Chapter 3 in
details.
*4 The software development tool S5U1C17001C (GNU17) should be installed in the PC that is used for the
S1C17555/565/955/965 development. Use the GNU17 Ver2.0.0 or later versions for this product.
Note: When using the S5U1C17965T2, use the spacers included in this product to prevent the mounted
components from being short-circuited.
