Chapter 4 Technical Description
14
EPSON
S5U13719P00C100 Evaluation Board User Manual (Rev. 1.1)
Figure 4-1: Host Bus Connector Location (H1 and H2)
For the pinout of connectors H1 and H2, see Section Chapter 6, “Schematic Diagrams” on page 23.
4.4.2 Connecting to the Epson S5U13U00P00C100 USB Adapter Board
The S5U13719P00C100 evaluation board is designed to connect to the S5U13U00P00C100 USB Adapter Board.
The USB adapter board provides a simple connection to any computer via a USB 2.0 connection. The
S5U13719P00C100 directly connects to the USB adapter board through connectors P1 and P2.
The USB adapter board also supplies the 3.3V power required by the S5U13719P00C100. HIOVDD should be
selected for 3.3V and JP5 should be set to the 2-3 position.
When the S5U13719P00C100 is connected to the S5U13U00P00C100 USB Adapter board, there are 2 LEDs on
S5U13719P00C100 which provide a quick visual status of the USB adapter. LED1 blinks to indicate that the USB
adapter board is active. LED2 turns on to indicate that the USB has been enumerated by the PC.
The following diagram shows the location of connectors P1 and P2. P1 and P2 are 2mm x 2mm, 40-pin headers
(20x2).
H2
H1
