6. Evaluation Mode Operation
6. Evaluation Mode Operation
The Evaluation mode is a more advanced mode that gives the user greater control of the device configuration
via a one to one correspondence of buttons to messages in the message protocol. This mode requires more
interaction and selection from the user. It is recommended only to use this mode once the user is highly
familiar with the operation of the S1V30000’s series devices. Most aspects of this mode can also be more
easily demonstrated by the Demo and Reflash modes.
6.1 Configuration
tab
The configuration tab contains a set of buttons and drop-boxes, which are used to configure the
communication link and to configure its audio hardware and firmware.
Figure 7 Evaluation Configuration tab (application control window)
S1V30000 Series Graphical User Interface
Seiko Epson Corporation 15
Application (Rev 3.01)
