2. Operating Configuration
2. Operating Configuration
Fig. 2-1 illustrates the typical hardware configuration when using these functions.
USB device
Board containing S1R72U16
RS-232 cable
Main CPU
S1R72U16
IDE/CPU bus signal line
Control PC
Fig. 2-1 Typical hardware configuration
The blocks shown in Fig. 2-1 are as follows:
•
Board containing S1R72U16
¾
Corresponds to the product (system) board. These functions are controlled by the control PC.
•
Control
PC
¾
PC used to control these functions via terminal software using the RS-232 interface function.
•
USB
device
¾
A USB device such as USB memory, HDD, CD, DVD, or MO drive. Connect when using the
IDE-USB bridge. Not required if only checking (initializing) the connection between the LSI and main
CPU.
Table 2-1 shows RS-232 and terminal software settings.
Table 2-1 RS-232 and terminal software settings
Item Setting
Baud rate
19200bps
Data bit
8bit
Parity None
Stop bit
1
Flow control
None
Encoding Shift-JIS
Local echo
On
2
EPSON
S1R72U16 Development Support
Manual (Rev.2.00)
