Epson ProSense 307 User Manual Download Page 69

Page: 69 / 87

Related references

Time Screen Menus
Measurement Screen Menus

Solutions to Watch Charging Problems

If you experience problems charging the battery in your watch, try the following solutions:

• If the watch does not charge when you attach the USB charging clip, check the following:

• Make sure you fully charge the watch. Partially charging the watch can affect battery life.

• Make sure the USB charging clip is attached correctly.

• Clean the contact points on your watch and the USB charging clip and attach the clip again.

• If the battery was exhausted when you attached the USB charging clip, the charging screen may not

appear for 1 or 2 minutes. Wait for the screen to appear.

• Make sure you are using a compatible USB charger or USB port.

• If you still cannot charge your watch's battery, detach the USB charging clip and contact Epson

Support for help.

• If the watch and the USB charging clip become hot during charging, stop charging the watch, detach

the USB charging clip, and contact Epson Support for help.

• If you see an error screen indicating a charging error, stop charging the watch and move to an

environment with a temperature within the operating temperature range.

Parent topic:

Solving Problems Using Your Watch

Related tasks

Charging the Watch

Solutions to Watch Settings Problems

If you experience problems with the settings on your watch, try the following solutions:

• If the clock information disappears from the screen, the watch may have entered sleep mode and

turned off the time display. Press any button on the watch to wake it up. If the display does not turn on,
charge the watch's battery.

Summary of Contents for ProSense 307
























































































Search results

Summary of Contents for ProSense 307

Reviews:

Related manuals for ProSense 307

Brands by name

Popular brands

Epson ProSense 307, User Manual

Search results

Summary of Contents for ProSense 307

Reviews:

Related manuals for ProSense 307

Brands by name

Popular brands