156
5.
To select an input source for the other image, select the
Source
setting, press
Enter
, select the
input source, select
Execute
, and press
Enter
. (You can also change image sources, if necessary.)
6.
To switch the images, select the
Swap Screens
setting and press
Enter
.
7.
To change the image sizes, select the
Screen Size
setting, press
Enter
, select a sizing option,
press
Enter
, and press
Menu
to exit.
Note:
Depending on the video input signals, the images may not appear at the same size even if you
choose the
Equal
setting.
8.
To exit the split screen feature, select
Exit Split Screen
or press the
Esc
button.
Input Sources for Split Screen Projection
Parent topic:
Input Sources for Split Screen Projection
You can choose most input source combinations for split screen projection, except the following:
• Computer and LAN
• SDI and SDI
• HDMI and DVI-D
Note:
If you installed the optional DisplayPort interface board, you also cannot choose the port 1 and
port 2 input sources for split screen projection. The split screen feature supports signals up to 4k30p for
DisplayPort sources.
Parent topic:
Projecting Two Images Simultaneously
Using Advanced Image Adjustment Features
Follow the instructions in these sections to use your projector's advanced image adjustments.
Creating Image Presets
Adjusting Detail Enhancement
Adjusting the Color Convergence (Panel Alignment)
Adjusting the Color Tone (Color Uniformity)
Running Light Source Calibration
Parent topic:
Summary of Contents for Pro L12000QNL
Page 1: ...Pro L12000QNL L12002QNL User s Guide ...
Page 2: ......
Page 10: ......
Page 288: ...288 Laser warning labels are attached to the projector Inside ...
