Epson Pro L1060U User Manual Download

Page: 139 / 315

139

Note:

Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or

the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.

Parent topic:

Using Basic Projector Features

Related tasks

Replacing the Remote Control Batteries

Projection Modes

Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.

•

Front

(default setting) lets you project from a table in front of the screen.

•

Front/Ceiling

flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.

•

Rear

flips the image horizontally to project from behind a translucent screen.

•

Rear/Ceiling

flips the image over top-to-bottom and horizontally to project from the ceiling and behind

a translucent screen.

Note:

To view 3D images, you must project onto the front of a silver screen designed for passive 3D

images.

Changing the Projection Mode Using the Remote Control
Changing the Projection Mode Using the Menus

Parent topic:

Using Basic Projector Features

Changing the Projection Mode Using the Remote Control

You can change the projection mode to flip the image over top-to-bottom.

Turn on the projector and display an image.

Hold down the

A/V Mute

button on the remote control for 5 to 10 seconds.

Summary of Contents for Pro L1060U




























































































































































































































































































































Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands

Epson Pro L1060U, User Manual

Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands