PriorityFax 1000 M anual
While holding down the
DIAL TONE RESET
button, enter a
telephone number using the keypad. If you are using an
international
access code,
press
REDIAL
after
the
code
and
before
the rest of the number.
Also,
if your telephone system requires a
code such as 9 before a telephone number, press
REDIAL
after the
code.
Pressing
REDIAL inserts a
pause in
the
dialing. You may
enter a maximum of 16 digits (15 if
tone is
selected) for each one
touch number. (A pause counts as one digit.)
Press
Ml.
Release the
DIAL TONE RESET
button. The number you entered
is now stored and
can
be dialed with the
Ml
button.
Write down an identification next to Ml on the Memory Index
label on the telephone cradle.
Repeat the above steps to create two more one-touch fax numbers.
After you have registered
the
one-touch numbers, you can send a
fax to any of those numbers in just four steps:
Insert the document face down in the feeder.
Lift up the handset and wait for a dial
tone.
Press the button for the one-touch fax number you want to use -
M 1 , M 2 , o r M 3 -
and listen for the fax tone.
Press
START
and
hang
up when you hear the fax tone.
2-10
Summary of Contents for PriorityFax 1000
Page 1: ......
