Epson PP-100II User Manual Download

Page: 102 / 143

Maintaining Your Product

102

4. Use a vacuum-cleaner to clean the dust on the filters.

5. Place the filters back in position.

6. Tighten the screws to close the filter covers.

Caution:

Clean the filter periodically (once in every six months).

Getting Maintenance Information

You can get helpful information for maintenance and support of the product, such as the
cumulative number of printed discs, the free space of the maintenance box, and the service
life of the drives.

1. Make sure that the product is connected to the computer via the USB cable and that the

product is turned on.

2. Click

Start

(

in Windows 7 or Windows Vista), point to

All Programs

Programs

Point to

EPSON Total Disc Maker

, and then click

EPSON Total Disc Setup

3. Select CD/DVD/BD Publisher, and then click

Properties

4. Click the

Maintenance Info

tab.

Note:

When

Service life of Drive1/Drive2

is close to 100%, it is time to replace it.

Summary of Contents for PP-100II
















































































































































Search results

Summary of Contents for PP-100II

Reviews:

Related manuals for PP-100II

Brands by name

Popular brands

Epson PP-100II, User Manual

Search results

Summary of Contents for PP-100II

Reviews:

Related manuals for PP-100II

Brands by name

Popular brands