Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized reseller.
To find the nearest reseller, contact Epson.
Notices
Wireless LAN Safety and Specifications
Wireless LAN module model: WN7522BEP
This document provides safety instructions and describes the specifications. Read this
document carefully before use to ensure your safety and product performance.
Data transmission is always initiated by software, which is the passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip. Several
special packets are initiated by the MAC. These are the only ways the digital baseband
portion will turn on the RF transmitter, which it then turns off at the end of the packet.
Therefore, the transmitter will be on only while one of the aforementioned packets is
being transmitted. In other words, this device automatically discontinue transmission in
case of either absence of information to transmit or operational failure.
This equipment is restricted to indoor operation only.
U.S. FCC Notices
FCC ID: BKMAE-7522
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. Properly shielded
and grounded cables and connectors must be used for connection to host computers and
/ or peripherals in order to meet FCC emission limits.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This
equipment should be installed and operated keeping the radiator at least 7.8 inches
(20 cm) or more away from person’s body.
6
Select one of the following as the
Connection Mode
setting:
•
Quick
for a direct connection to a computer, tablet, or smartphone.
•
Advanced
to connect your projector to a router or access point.
7
Select any other settings on the
Wireless LAN
menu as necessary. See
the online User’s Guide for details.
8
When you finish selecting settings, select
Complete
and follow the
on-screen instructions to save your settings and exit the menus.
Install the optional software
If you connected a computer to the projector, you can download and install
optional software to perform various tasks wirelessly, such as monitoring or
controlling your projector and projecting from multiple computers.
You can download the optional software and its manuals from the Epson
website, as described in “Where to get help” , or by installing the projector CD.
Note:
The projector CD links you to the product’s support page and gives
you the option to install links on your desktop to the software manuals. An
Internet connection is required.
Projecting from a mobile
device
You can project wirelessly from a mobile device (iOS, Android™, or
Chromebook™) using the Epson iProjection™ app and a QR code.
1
Download Epson iProjection from the Apple App Store, Google Play™, or
Chrome Web Store.
2
If you connected the projector to a network wirelessly, make sure to
connect your mobile device to the same network.
3
Press the
LAN
button on the remote control to display a QR code on
the projector screen.
4
Start Epson iProjection on your mobile device.
5
Use the QR code reader feature to read the QR code displayed.
6
Follow the app instructions to connect your device to the projector.
For more information on setting up and using this app, visit
www.epson.com/projectorapp
.
EPSON and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed Your
Vision is a registered logomark of Seiko Epson Corporation.
Apple, App Store, Mac, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Android, Chromebook, and Google Play are trademarks of Google Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2017 Epson America, Inc., 4/17
Printed in XXXXXX
CPD-53666
Troubleshooting
If you see a blank screen or the
No signal
message after turning on your
computer or video device, check the following:
•
Make sure the Status light on the projector is blue and not flashing, and
the A/V Mute slide is open.
•
Press the
Source Search
button on the projector or remote control to
switch to the correct image source, if necessary.
•
Press the
Home
button on the projector or remote control to verify the
source input and settings.
•
On Windows
®
7 or later, hold down the Windows key and press
P
at the
same time, then click
Duplicate
.
•
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD
or have an icon such as
. You may have to hold down the
Fn
key while pressing it (such as
Fn
+
F7
). Wait a moment for the display
to appear.
•
If you’re using a Mac laptop, open
System Preferences
and select
Displays
. Click the
Arrangement
tab and select the
Mirror Displays
checkbox.
Where to get help
Manuals
For more information about using the projector, click the icons on your desktop
to access the online manuals (requires an Internet connection). If you don’t see
icons to the manuals, you can install them from the projector CD or go to the
Epson website, as described below.
Internet support
Visit
www.epson.com.jm/support
for solutions to common problems. You
can download utilities and documentation, get FAQs and troubleshooting
advice, or e-mail Epson.
Telephone support services
You can also speak to a service technician by calling one of these numbers:
Argentina
(54 11) 5167-0300
0800-288-37766
Honduras**
800-0122
Code: 8320
Bolivia*
800-100-116
México
01-800-087-1080
Chile
(56 2) 2484-3400
México, D.F.
(52 55) 1323-2052
Colombia
018000-915235
Nicaragua*
00-1-800-226-0368
Bogota
(57 1) 523-5000
Panama*
00-800-052-1376
Costa Rica
800-377-6627
Paraguay
009-800-521-0019
Dominican
Republic
1-888-760-0068
Peru
Lima
0800-10126
(51 1) 418-0210
Ecuador*
1-800-000-044
Uruguay
00040-5210067
El Salvador*
800-6570
Venezuela
(58 212) 240-1111
Guatemala*
1-800-835-0358
*
Contact your local phone company to call this toll free number from a mobile phone.
**
Dial the first 7 digits, wait for a message, then enter code.
If your country does not appear on the list, contact your nearest Epson sales
office. Toll or long distance charges may apply.
Registration
Register today to get product updates and exclusive offers. You can
use the CD included with your projector or go to your product support page at
www.epson.com.jm/support
and select
Registration
.
4134389 Rev.0
1-B
C
4134389 Rev.0
1-B
M
4134389 Rev.0
1-B
Y
4134389 Rev.0
1-B
K
