8
If your network assigns addresses automatically, turn on the
DHCP
setting.
If not, turn off the
DHCP
setting and enter the projector’s
IP Address
,
Subnet Mask
, and
Gateway Address
, as needed. Then press
Esc
.
9
To prevent the IP address from appearing on the network standby screen,
set the
IP Address Display
setting to
Off
.
10
When you are finished, select
Complete
and press
, then press
again to save your settings.
11
Press the
Menu
button to exit the menu system.
12
See “Install network software” for additional instructions.
Install network software
Computer
Install the EasyMP
®
Network Projection software on each computer that will
project over the network. Use the CD labeled Epson Projector Software to
install the program.
For instructions on installing and using your network software, click the icon
on your desktop to access the online EasyMP Network Projection Operation
Guide (requires an Internet connection). If you don’t see the EasyMP Network
Projection Guide icon, you can install it from the projector CD or go to the
Epson website, as described on the right.
To monitor and control your projector over the network, download and install
the EasyMP Monitor software and manual from the Epson support web site.
You can install a link to the downloads page from the projector CD or go to the
Epson website, as described on the right
Mobile device
To project from an iOS or Android™ device, download
and install the Epson iProjection™ app. Visit
epson.com/projectorapp
(U.S.) or
epson.ca/projectorapp
(Canada) for more information.
Troubleshooting
If you see a blank screen or the
No signal
message after turning on your
computer or video device, check the following:
•
Make sure the
Status
light on the projector is blue and not flashing, and
the
A/V Mute
slide is open.
•
Press the
Source Search
button on the projector or the remote control to
switch to the correct image source, if necessary.
•
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD
or have an icon such as
. You may have to hold down the
Fn
key while pressing it (such as
Fn
+
F7
). Wait a moment for the display
to appear.
•
If you’re using a Mac laptop, open
System Preferences
and select
Displays
. Click the
Arrangement
tab, and select the
Mirror Displays
checkbox.
Where to get help
Manual
For more information about using the projector, click the icons on your desktop
to access the online manuals (requires an Internet connection). If you don’t
have icons to the manuals, you can install them from the projector CD or go to
the Epson website, as described below.
Telephone support services
To use the Epson
®
PrivateLine
®
Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with a
support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6
AM
to 8
PM
, Pacific Time, Monday through Friday, and 7
AM
to 4
PM
, Pacific Time, Saturday. Days and hours of support are subject to change
without notice. Toll or long distance charges may apply.
4
Attach the wireless LAN module cover and secure it using the screw you
removed.
5
Press the
Menu
button on the remote control, select the
Network
menu, and press
.
6
Choose
Network Configuration
and press
.
7
Select the
Wireless LAN
menu and press
.
8
Choose
Connection Mode
, press
, select
Quick
(for a direct
connection to a computer, tablet, or smartphone) or
Advanced
(for
a connection to a router or access point), then press
again. When
you’re finished, press
Esc
to return to the Wireless LAN menu.
9
If you chose the Advanced connection mode, select
SSID
, press
and
enter your network name (SSID) on the screen that appears.
•
To select a number or character, use the arrow buttons on the
remote control to highlight it, then press
.
•
To switch between uppercase and lowercase letters, select
CAPS
and press
.
•
To change the displayed symbols, select
SYM1
or
SYM2
and
press
.
When you’re finished entering the SSID, select
Finish
and presss
.
10
If you chose the Advanced connection mode, select
IP Settings
and
press
.
If your network assigns addresses automatically, turn on
DHCP
. If not,
turn off
DHCP
and enter the projector’s
IP Address
,
Subnet Mask
, and
Gateway Address
, as needed.
To enter numbers, use the arrow buttons on the remote control to
highlight a number, then press the
button. When you’re finished
entering an address, highlight
Finish
, then press
. Press
Esc
.
EPSON, EasyMP, and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed
Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson
America, Inc.
OS X and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2014 Epson America, Inc., 11/14
Printed in XXXXXX
CPD-42075
11
To prevent the SSID and IP address from appearing on the network
standby screen, set the
SSID Display
and
IP Address Display
settings
to
Off
.
12
When you’re finished selecting settings in the Wireless LAN menu, press
Esc
.
13
If you are connecting the projector to a secure network, select the
Security
menu and press
. Then select settings and press
Esc
when
you’re finished.
14
Select
Complete
and press
, then select
Yes
and press
again to
save your settings.
15
See “Install network software” for additional instructions.
Project over a wired
network (PowerLite X27/
X29/W29)
Follow the steps here to configure your projector for your wired network
using the projector’s menu system.
1
Plug in and turn on the projector.
2
Press the
Menu
button on the remote control, select the
Network
menu, and press
.
3
Select
Network Configuration
and press
.
4
Select the
Basic
menu and press
.
5
Select the
Projector Name
setting and enter a name (up to 16
characters long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press
to select
them.
Note:
See the online User’s Guide for information on adding passwords.
6
Select the
Wired LAN
menu and press
.
7
Choose
IP Settings
and press
.
Internet support
Visit
epson.com/support
(U.S.) or
epson.ca/support
(Canada) for solutions
to common problems. You can download utilities and documentation, get
FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at
epson.com/webreg
.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you
can purchase online at
epsonstore.com
(U.S. sales) or
epson.ca
(Canadian
sales).
