Doing More with PowerLite Presenter
51
■
Child Lock:
Turn this setting
on to
lock the
button on the control panel. See
page 46 for more information.
■
High Altitude Mode:
Turn this setting on if you use the projector at an altitude
above 4900 feet (1500 meters), to ensure that the projector does not overheat.
4. Press or
to adjust the setting.
5. Press
to exit the menu.
Signal Menu
1. Press
on the remote control. You see the Visual Setup menu.
2. Press
to highlight
Signal
, then press
to select it.
3. Press
until you see the option you want to set.
You can adjust the following items:
■
Keystone:
Adjust this setting to correct the shape of the image if the projector has
been tilted upward.
■
Auto Keystone:
Select On to have the projector automatically adjust the shape of
the image when the projector has been tilted upward or downward.
■
Power Consumption:
Select
ECO
if the images being projected are too bright (such
as when projecting images in a dark room or onto a small screen). You cannot select a
Power Consumption setting when the Color Mode is set to
Auto
.
■
Resolution:
Set to
Auto
to have the projector automatically identify the resolution
of the input signal. If necessary (because some of the image is missing, for example),
adjust to
Wide
or
Normal
.
■
Video Signal:
Normally, you can leave this set to Auto when using external
equipment. If no image appears or you see interference, select the appropriate signal.
4. Press or
to adjust the setting.
5. Press
to exit the menu.
