Playing DVDs
21
Adjusting the Picture
After you set up and start the projector, you may need to make certain adjustments.
■
If the image is too low, you can extend the feet (by pressing the foot adjustment levers)
and tilt the projector up.
■
If the image is horizontally tilted, you can turn the feet to level it.
■
Your projector automatically detects the vertical tilt and corrects the image shape. If you
find that the image is not rectangular, however, use the
Keystone
buttons on the remote
control or the Keystone setting in the Signal menu (see page 51) to adjust the image
shape.
