Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network.
Wired Network Projection
Wireless Network Projection
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
Crestron RoomView Support
Wired Network Projection
You can send images to your projector through a wired network. To do this, you connect the projector to
your network, and then set up your projector and computer for network projection.
After connecting and setting up the projector as described here, install the network software from the
Epson Projector Software
CD-ROM on your computer. Use the following software and documentation to
set up, control, and monitor network projection:
•
EasyMP Network Projection
software sets up your computer for network projection. See the
EasyMP Network Projection Operation Guide
installed from your projector CD for instructions.
•
EasyMP Monitor
software (Windows only) lets you monitor and control your projector through the
network. You can download the latest software and documentation from the Epson web site. Go to
(U.S.) or
(Canada) and select your projector.
Connecting to a Wired Network
Selecting Wired Network Settings
Parent topic:
Using the Projector on a Network
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5 shielded cable or better.
1.
Connect one end of the network cable to your network router.
44
Summary of Contents for PowerLite D6150
Page 1: ...PowerLite D6150 D6155W D6250 User s Guide ...
Page 2: ......
Page 22: ...Rear Ceiling 22 ...
Page 91: ...Parent topic Starting a Slide Show or Presentation 91 ...
