Epson PowerLite 825, User Manual

Page: 40 / 199

40
Using the Remote Control
Creating Your Own Pattern
You can transfer any image from your computer or video source to the
projector and then use it as a pattern. If you assign it to the
User
button as described on page 39, you can display it any time you want
by simply pressing the
User
button on the remote control.
Start by displaying the image you want to use from a computer or
other source. Then follow these steps to capture the image and transfer
it to the projector:
1. In the Settings menu, highlight
Pattern
and press
Enter
.
2. Select
User Pattern
and press
Enter
.
3. When you see a message asking if you want to use the current
image as the pattern, select
Yes
and press
Enter
.
4. Press
Enter
again.
5. When you see a confirmation message, select
Yes
and press
Enter
. Saving the image may take a few moments. Do not use
your projector, remote control, or video source while the logo is
being saved.
6. When you see a message that saving is complete, press
Menu
to
exit.
note
When you choose an image
for the user pattern, it erases
any previously used image.