Epson PowerLite 1825, User Manual

Page: 194 / 222

194
Solving Problems
In EMP SlideMaker, your PowerPoint files don’t display
thumbnails and can’t be pasted into scenarios.
Make sure the MS Office JPEG converter has been installed. See the
MS Office documentation for instructions. Also, make sure
PowerPoint is installed on the computer you’re using to build the
scenario.
You can’t edit scenario files in EMP SlideMaker after they
have been transferred to the USB drive.
You can only edit scenarios before they are transferred. Open the
scenario files saved on your hard drive, make any changes, then
transfer the scenario to your USB drive.
You can’t transfer your slideshow to the drive because you
aren’t able to see the drive letter.
You must connect the drive to your computer before you select
Send
Scenario
from the Scenario Option(s) menu. If this happens, close
and restart EMP SlideMaker 2. Make sure your drive is connected
before you select
Send Scenario
.
You can’t play your movies on the projector.
■ The projector supports MPEG2 and WMV files. It does not
support MPEG1 files. The audio format is MPEG1 Layer 2.
Linear PCM and AC-3 audio cannot be played back.
■ If your MPEG2 movie stops playing, check the light on the
projector’s wireless module. If the light doesn’t come on, turn off
the projector and reinstall the module.
■ Movie files included in a PowerPoint presentation can’t be played
back in a scenario.