4-4 Getting Photos Into Your Computer
2
Connect the long cable to the short Macintosh adapter
cable, then tighten the screws.
3
With the arrow on the cable facing up, line up the cable
connector with the port on your Macintosh. Then insert
the connector.
.
4
Open the connector cover on the side of the camera, as
shown on page 4-2.
5
Depending on the type of cable you have, line up either
the arrow or the flat side of the cable connector with the
mark on the camera’s serial port (as shown on page 4-3).
Then insert the connector.
6
Turn on the camera and your Macintosh system.
Transferring Photos With Image
Expert
PhotoPC 600 provides several different ways to transfer your
pictures from the camera to your computer. The simplest
method is to use the Image Expert software that came with
your PhotoPC 600. This lets you view small thumbnail
images of your pictures, and then quickly transfer them to an
album (folder) on your hard disk drive.
If you haven’t installed your software, do it now, following
the instructions on page 1-10.
Macintosh
adapter
popch4.fm5 Page 4 Tuesday, August 26, 1997 5:00 PM
